The Servo Regulator is designed for use when a receiver battery is being run at 2S lithium battery voltage but you need a lower voltage for a servo voltage. The Servo Regulator has a fixed 6.0V output and has a current capability of 3A continuous. The regulator has a large output capacitor to handle the peak currents required by digital servos. The regulator has universal connectors with 22-gauge wire.

To maintain a 6.0V output the battery voltage must stay above 7.0V.  A battery voltage below this will result in an output voltage of the battery voltage minus 1.0V (i.e. for 6.6V battery voltage output will be 5.6V)