Knuckle Headers for the DA 170 / DA 215
28mm Stainless Steel
Not sure of the right drop or angle for your exhaust setup ? Knuckle Headers fix the problem !!
Fit the canister to the knuckle header using the Teflon joiner. Slide the canister into your fuselage. Adjust the knuckles for the correct drop and side thrust angles. Now bolt the knuckle header to your motor for the final fit. Carefully remove the exhaust assembly and now silver solder both knuckles for a permanent header, with the perfect position.
If you are running a twin, you will need a pair of these headers, with the right flange for your motor. DA70 / DA100 / DA120 / DA150 / DA170 / DA215
Maximum Side adjustment - 70mm
Minimum Drop - 40mm
Maximum Drop 110mm
Related Products
Teflon Coupler and Clamps 28mm
Complete set for fitting canisters and headers including 75mm Teflon tube + 2 clampsDA-150, DA-..
$42.00
Silver Solder
Silver Solder with Flux1.5mm x 500mmThis stuff is awesome, and really easy to use once you learn how..
$38.00
DA Exhaust Gaskets
DA Exhaust Gaskets, all sizes available. Please specify which size motor you have in your order..
$4.00
DA-170
Our 2 cylinder powerhouse for 40% aerobatic planes ! Well proven, with ample power for Unlimited aer..
$3,999.00
DA-215
The newest Desert Aircraft offering, Shipping now! Already proven in competition, the DA215 is a gre..
$5,699.00
Exhaust Clamp - 28mm
Exhaust Clamp Sized for 28mm OD Teflon CouplerDA150/DA170 size..
$4.00
DA-150/170 Canister and Header Combo (DIY)
Header and Canister combo to fit the DA-150/170This is supplied with knuckle headers, that will fit ..
$1,115.00
DA-215 Canister and Header Combo (DIY)
Header and Canister combo to fit the DA-215This is supplied with knuckle headers, that will fit any ..
$1,250.00
Tags: Knuckle Header, 28mm, DA-215, DA-170