High Quality Made in the USA by White Rose Engineering.

These tail wheel assemblies are flash !!

Click here for Dimensions: http://www.whiteroseeng.com/products/documents/LargeCFTWasse.PDF

We offer two models of tail wheels. They all feature carbon fiber springs which are made in compression molds and cured in an autoclave. There are two different spring dimensions. All of our tail wheels have identical yoke and wheel assemblies. The wheel, yoke, spring and steering arm are all included when you buy an assembly. 

Our large tail wheel assemblies are 8 inches long and will lift the back of the fuselage 4 1/2 inches off the ground. The assemble weighs less than 3 ounces. The carbon fiber spring is 3/16 of an inch thick and 7/8 inches wide. These tail wheels are intended for aircraft in the 35% to 45% size category.

The tail wheels with the shorter springs are 7 inches long and will lift the back of the fuselage 3 1/4 inches off the ground. The assembly weighs less than 3 ounces. The carbon fiber spring is 1/8 inch thick and 7/8 inches wide. These tail wheels are intended for aircraft in the 25% to the 30% size category.

All our tail wheels come ready to accept a steering arm (supplied) for those who like to use springs from the rudder horn or push rods. We also drill a 1/16 hole through the yoke to accept a tiller arm or direct drive steering method. See the Gallery for photos of our direct drive tiller arm installations. Pre-bent tiller arms are available and pictured at right.

Our standard tire is a softer compound a la Du Bro. We also offer an optional urethane spoked wheel that is molded directly onto the hub. This stuff is tough as nails and will take lots of abuse.  Industrial conveyor systems, roller coaster wheels and skate boards all utilize urethane tires. The draw back to the urethane is the noise on hard surface runways but you will never wear it out.

More info: https://www.whiteroseeng.com/products/tf.html
Why use our tail wheel ? https://www.whiteroseeng.com/downloads/documents/WHYISONEWORTHMORETHANTHEOTHERS.pdf








Carbon Tail Wheel Assembly 8" - 35%-40% with Urethane Wheel by White Rose Engineering

  • $155.00


Tags: Carbon, Tail, Wheel, White, Rose