Knuckle Headers for the DA 70

22mm Stainless Steel

Not sure of the right drop or angle for your exhaust setup ? Knuckle Headers fix the problem !!

Fit the canister to the knuckle header using the Teflon joiner. Slide the canister into your fuselage. Adjust the knuckles for the correct drop and side thrust angles. Now bolt the knuckle header to your motor for the final fit. Carefully remove the exhaust assembly and now silver solder both knuckles for a permanent header, with the perfect position. 

If you are running a twin, you will need a pair of these headers, with the right flange for your motor. DA70 / DA100 / DA120 / DA150 / DA170 / DA215

Maximum Side adjustment - 70mm

Minimum Drop - 40mm

Maximum Drop 110mm